DigidownCR Internal Memory
The DigidownCR has 512KB of internal memory. This is sufficient for 15-20 card
downloads. The files and folders can be read when DigidownCR is in USB mode.
Once connected, the DigidownCR will appear as a standard removable disk drive
with the volume name ‘DigidownCR’. The files and folders it contains can be
viewed and managed using Windows in the usual way.
DigidownCR Directory Structure:
The DigidownCR creates a directory structure on its internal memory.
Two top-level directories are created:
‘DIGIDOWN’ and
‘UPDATES’
‘Digidown’ has the sub-directory:
‘CARD’ where tachograph card downloads are stored.
This directory creation process occurs automatically after formatting and
generally takes just a few seconds.
Filenames:
The downloaded card files appear in the ‘\DIGIDOWN\CARD’ directory.
Files with short file names are labelled CDxxxxxx.CRD where ‘xxxxxx’ is a
number starting at 000001 and increasing by 1 for each download performed.
Files with standard EU long file names are labelled:
C_YYYYMMDD_HHMM_A_SMITH_xxxxxxxxxxxxxxxx.DDD
C denotes a card file. The next 2 sections are the date and time of the download.
This is followed by the driver name and number.
Alternatively the Digidown CR can be programmed to use any of the alternative
file name formats. Please contact your dealer for details.
DigidownCR Memory Formatting:
The DigidownCR memory can be formatted using Windows. It must be formatted
as FAT12 (which Windows specifies in File System as ‘FAT’).
