Unpacking Your Fountain Kit
Check that all parts are present and free from defects.
If any fountain kit parts are missing or damaged, PLEASE DO NOT RETURN TO
PLACE OF PURCHASE! Please notify LiquidArt at (800) 974-9586 and replacement
parts will be sent to you at no charge.
Parts List: 2x2SGL Fountain Base
2’x2’ Fountain Reservoir with grating and polymesh screen.
400GPH water pump.
Pre-assembled flow control valve with attached ¾” hose (approximately 30 inches
long).
NOTE: Depending on which fountain kit you ordered, you will also have either
the Hollow Springs rock (shown above, center) or the Klamath Basin rock
(above right).
Your rock also comes with a small insert (reducer) in the openings
at the top of the rock. This is used to increase the head-height of the water flow,
but the rock bubbler can be used with, or without these components, to help
achieve the desired water head-height and appearance.
Tools necessary for installation:
Shovel, level, wire-cutters or scissors, screwdriver, and marker paint (optional).
