background image

SOLD AND SERVICED BY
A NETWORK OF HIGHLY TRAINED

FULL SERVICE DISTRIBUTORS

L I Q U I D

CONTROLS

    C O N T R O L S ,   L L C

105 Albrecht Drive
Lake Bluff, IL 60044-2242
Telephone: (847) 295-1050
FAX: (847) 295-1057
Website: www.lcmeter.com

Distributed By:

Backed By Our Worldwide Reputation For

Quality, Accuracy and Advanced Design.

 1999 Liquid Controls

Printed in U.S.A. (0799)

Bulletin #49137C

Warranty:
Liquid Controls, L.L.C. (“Seller”) products are warranted against
defects in materials or workmanship for a period of one (1) year
from date of installation, provided that the warranty shall not
extend beyond twenty-four (24) months from the date of original
shipment from seller. Seller’s obligations, set forth below, shall
apply only to failure(s) to meet the foregoing obligations
provided that seller is given written notice within (30) days of
any occurrence from which a claim of defect arises. If a warranty
dispute occurs, the purchaser shall be required to provide Seller
with proof of date of sale. The minimum requirement to establish
date of sale shall be a copy of the Seller’s invoice. In the event
that a factory inspection by Seller or its designee(s) supports the
validity of a claim, at the discretion of Seller, repair, replacement
or refund shall be sole remedy for defect

and shall be made, free of charge, ex-works factory. In no event
shall Seller be liable for any special, consequential, incidental,
indirect or exemplary damages arising out of warranty, contract,
tort, (including negligence) or otherwise, including but not
limited to, loss of profit or revenue, loss of use of the product or
any associated products and/or equipment, cost of substitute
goods or services, downtime costs or claims of or by Purchaser’s
clients or customers. In any event, the total liability  of Seller for
any and all claims arising out of  or resulting from the
performance, non-performance or use of the product shall not
exceed the purchase price of the individual product giving rise to
the claim. All other guaranties, warranties, conditions and
representations, either express or implied, whether arising under
any statute, common law, commercial usage or otherwise are
excluded. Electronic Products require

Installation, start-up and servicing by local factory-trained
service representatives. In the absence of installation, start-up and
servicing of Electronic Products by Seller trained service
representatives, this warranty is null and void. Seller’s
obligations as set forth above shall not apply to any product, or,
or any component part thereof, which is not properly installed,
used, maintained or repaired, or which is modified other than
pursuant to Seller’s instructions or approval. NOTE: The above
warranty applies only to products manufactured by Liquid
Controls, Lake Bluff, Illinois. Private label, OEM, and/or
products manufactured by Liquid Controls licensee(s) are
specifically excluded from the above warranty. Consult the
factory for all non-Liquid Controls manufacturers’ warranties.
NO IMPLIED OR STATUATORY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE SHALL APPLY.

Содержание LectroCount3













































Отзывы: