LC-ON THE GO
TM
Wireless WiFi Adapter
WWW.LCMETER.COM
9
11. Setting up a Dual Meter System – NEW
System.
A dual meter system consists of 2 meters, 2
electronic registers, a multiplexer box and a printer.
a. Set the Internal Jumpers. Using a 5/64” Allen
wrench, remove the 8 black socket head screws
and remove the cover of the multiplexer box.
b. Locate JP5 and move the jumper from the CTS
position to the 12V position.
c. Jumpers JP1, JP2, JP3, JP4 and JP7 should be
positioned on the right.
d. Replace the cover on the multiplexer box.
e. Install the Multiplexer and connect the printer.
Install the multiplexer in its final location and
make sure it is grounded properly. Next, plug
in the data and the power cable into the front
side of the multiplexer. Plug the other end of the
cables into the back of the printer.
f. Connect the ON THE GO WiFi adapter to the RS-
232 LAP PAD female DB-9 connection on the
front of the multiplexer box.
g. The green power light on the ON THE GO
WiFi adapter will illuminate when the system
is powered. A separate power supply is not
required.
IV. CONNECTING TO A NEW DUAL METER SYSTEM
