LC-ON THE GO
TM
Wireless WiFi Adapter
WWW.LCMETER.COM
11
SPECIFICATIONS FOR P/N: 81538
ANTENNA . . . . . . . . . . 4.3 inch WiFi Antenna
. . . . . . . . . . . . . . . .
Omni-directional ‘Rubber
. . . . . . . . . . . . . . . .
Duck’ Antenna, 2.4 GHz,
. . . . . . . . . . . . . . . .
2.5 dBi, Reverse SMA, 50
. . . . . . . . . . . . . . . .
Ohm, 20W
TEMPERATURE RANGE
Operating Range . . . . . . -40°C to +85°C (-40°F to
. . . . . . . . . . . . . . . .
+185°F)
Humidity Range . . . . . . . 0% to 90% non-
. . . . . . . . . . . . . . . .
condensing
SECURITY/PROTECTION . . 256-bit AES Encryption
BAUD RATE . . . . . . . . . 19200 bps – setting from
. . . . . . . . . . . . . . . .
the factory
DATA RATES AVAILABLE . . 300 bps to 921,600 bps
THRESHOLD . . . . . . . . 100 bytes
PROTOCOL . . . . . . . . . TCP
LOCAL PORT . . . . . . . . 10001
CONNECTOR(S) . . . . . . . Serial: DB9 - DTE (male)
. . . . . . . . . . . . . . . .
12. Using the ON THE GO
TM
WiFi Adapter to
Connect to EZ Command or EZ Command
Lite
a. Connect ON THE GO WiFi Adapter to a
Lectrocount register using a lap pad adapter or
multiplexer box.
b. Turn power on. The green power light on the ON
THE GO WiFi Adapter will illuminate.
c. Connect to the WiFi adapter via a local PC or
tablet.
d. Open EZ Command or EZ Command Lite on the
PC or tablet.
e. Select the Tools tab at the top of the program
window
f. From the Tools drop down menu, select Setup
Communication:
g. In the Setup Communication window, select IP
Config. Enter Local IP Port, Node IP Address,
and Node IP Port as follows:
V. CONNECTING TO EZ COMMAND OR EZ COMMAND LITE