Rev: 05.20.2022
Page 6
CCD-0001745
Auto Level
After unhitching from tow vehicle and parking the vehicle at a safe distance away from the 5th Wheel, press
the Power button (Fig. 1K) and then press AUTO LEVEL button (Fig. 1F).
Note:
Once the automatic leveling cycle has been started, it is important that there is no movement inside
the 5th Wheel until the leveling process has been completed. Failure to remain still during the
leveling cycle could have a negative effect on the performance of the leveling system.
Note:
For the hitch recognition feature to function, the auto level sequence must be started with the front
of the 5th Wheel above level.
Auto Level Sequence
1.
When auto level sequencing begins, the front of the 5th Wheel will lower slightly to a point
below level.
2.
Rear jacks will be grounded.
3.
A side-to-side leveling sequence occurs.
Note:
On the 6-Point system, the two middle jacks are grounded to stabilize the 5th Wheel.
The two middle jacks do not level the 5th Wheel.
4.
Each jack will perform a final grounding touch.
5.
LCD display will read "AUTO LEVEL SUCCESS" (Fig. 4).
6.
LCD display will then read “READY Jacks: Down” (Fig. 5A), and the green LED at the center of the four
jack buttons will be illuminated (Fig. 5B).
Fig. 3
Fig. 2
B
A
Fig. 4
A
B
Fig. 5
Quick Release
(pull) Pin
