background image

2

lippert.com 

    432-LIPPERT (432-547-7378)   

 

Rev: 08.29.22

Quick Drop Stabilizer

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004455

Introduction

Quick Drop Stabilizers can be installed on travel trailers 

and 5th wheels. Travel trailer options include both front and 

rear stabilizers or a rear stabilizer only, while 5th wheels 

typically utilize only a rear stabilizer.
Additional information about this product can be obtained 

from lci1.com/support or by downloading the free 

LippertNOW. The app is available on Apple App Store

®

 for 

iPhone

®

 and iPad

®

 and also on Google Play

 for Android

 

users.
iPhone

®

, and iPad

®

 are registered trademarks of Apple Inc.

Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and understand all instructions before installing or 

operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e., the 

degree of difficulty, operation and ability of the individual 

performing the instructions. This manual cannot begin 

to plot out instructions for every possibility, but provides 

the general instructions, as necessary, for effectively 

interfacing with the device, product or system. Failure 

to correctly follow the provided instructions may result 

in death, serious personal injury, severe product and/

or property damage, including voiding of the LCI limited 

warranty. 
Quick Drop Stabilizers are intended for the purpose of 

stabilizing the trailer after the trailer has been leveled. The 

use of this system for any reason other than which it is 

intended is prohibited by Lippert’s Limited Warranty and 

may result in serious personal injury or death. Quick Drop 

Stabilizers are designed as a stabilizing component system 

and should not be used to provide service for any reason 

under the trailer such as changing tires or repairing or 

replacing any components beneath the trailer.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

AN INSTALLATION PROCEDURE HAS A SAFETY 

RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS 

PERSONAL INJURY OR SEVERE PRODUCT OR 

PROPERTY DAMAGE IF NOT PERFORMED SAFELY 

AND WITHIN THE PARAMETERS SET FORTH IN THIS 

MANUAL.

QUICK DROP STABILIZERS ARE DESIGNED AS 

A STABILIZING COMPONENT ONLY. DO NOT USE 

ANY QUICK DROP STABILIZERS TO LEVEL A 

TRAILER. USE OF QUICK DROP STABILIZERS TO 

LIFT A TRAILER FOR SERVICE CAN CREATE A 

DANGEROUS SITUATION THAT CAN RESULT IN 

DEATH, SERIOUS PERSONAL INJURY OR SEVERE 

PRODUCT OR PROPERTY DAMAGE.

MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP 

CLEAR AND USE CAUTION.

Содержание 2022016064

























Отзывы: