background image

“Welcome to the Lipinski family of electronics.  Our L-629 compressor packs a few  

very unique features. Take time and familiarize yourself through this manual, so  

you can get the most from Lipinski products.”

 Lukas A. Lipinski
Executive Director

 1  INTRODUCTION

You have selected Lipinski equipment which hails from thirty years of recording 
experience of Mr. Andrew Lipinski and his devotion to state-of–the-art sound.

This L-629 Compressor has unusual features such as:

-

Tape Simulation system

-

Pre-compression system

-

Low-frequency distortion elimination-system

Our L-629 Compressor is different from most devices you have had a chance to 
use. It is  based on the fabled Fairchild Compressor.  The signal path is free of 
capacitors and integrated circuits.  
You can also use the LINK socket for joining two devices in stereo mode.

 2  UNPACKING

Our product is carefully packed by us to maximize safety in transport. We advise
that you unpack it on a soft, thick surface (carpet, fitted carpet, blanket etc)

It helps to save all original packing materials and use them when you move the
product.

Lipinski Sound Corporation                   Confidential Copyright © 2010                 4 

| Page

Содержание L-629












Отзывы: