Lipco Reversing Harrow UF 100L, Перевод оригинальной инструкции

Страница: 9 / 24

Operating instructions Reversing harrow UF 70L/ 80L/ 90L/ 100L
9 - 24 LIPCO 110037B-20-E BA UF70L_80L_90L_100L / 29.12.2009
4. Accident prevention
Most accidents that occur during work, maintenance or transport of a
machine are due to non-observance of the most elementary rules of
accident prevention.
It is, therefore, necessary that all licensed users (relatives,
employees, colleagues) read and observe the rules given below and
written on the adhesive labels of the machine itself:

Turn off the engine of the engine-driven machine, before carrying
out any adjustments, maintenance or cleaning on the machine!

Prior to any work on the machine, it should be placed on level
and solid ground! When working with the unit lifted, always
secure the unit mechanically by means of adequate supporting
elements!

In order to achieve the highest possible performance of the
LIPCO Reversing Harrow , it must always be in perfect condition.
Maintenance and repairs must be carried out by trained persons
only! Spare parts must at least comply with the technical
requirements specified by the manufacturer! This is only
guaranteed for
LIPCO original spare parts !

Before each use, screws and nuts, especially those of the cutting
blades and the drive, must be checked to ensure they are firmly
tightened!

Before starting up, please make sure that no people or animals
are in the vicinity!

Take special caution when working alongside roads or pathways!

Do not leave the machine running without supervision!

During service or repair work, make sure that no one can start up
the machine accidentally!

Do not wear wide or loose clothes (e.g. scarves)!

Do not, for any reason, climb onto the machine during operation!