8
C
omplete the assembly of your WWII Airplane Pylon by attaching the airplanes and their
support rods to the structure. Figure 4 illustrates the following procedure.
1. Note that the supporting rods have different shaped ends. Insert the
flattened ends of the support rods into the tubes protruding from the top
of the pylon. Refer to the diagram for further assistance.
2. Insert the D-shaped ends of the wires into the openings in the bottom of
the airplanes.
Once your accessory is wired, the base is secured, and the airplanes are attached, you are
clear for takeoff!
Attaching the airplanes to your WWII Airplane Pylon
Figure 4. Installing the support rods
