Lionel WWII Airplane Pylon Скачать руководство пользователя страница 2

C

ongratulations on your purchase of the amazing Lionel World War II Airplane Pylon! This
is an exciting accessory—two incredible WWII airplane models swoop around the tower.

Below the action, military strategies are planned in the illuminated building. The Lionel WWII
Airplane Pylon is perfect for any O or O-27 gauge layout.

Congratulations

Wiring your WWII Airplane Pylon with conventional power supply

3-4

Operating your WWII Airplane Pylon with conventional power supply

4

Operating your WWII Airplane Pylon in a TrainMaster Command Control 

5-6

Installing your WWII Airplane Pylon

7

Attaching the airplanes to your WWII Airplane Pylon

8

Replacing the lamp on your WWII Airplane Pylon

9-11

Limited Warranty/Lionel Service

12

Table of Contents

2

The following Lionel marks may be used throughout this instruction manual and are protected under
law. All rights reserved.

Lionel®, TrainMaster®, Odyssey®, RailSounds™, CrewTalk™, TowerCom™, DynaChuff™,
StationSounds™, Pullmor®, ElectroCoupler™, Magne-Traction®, CAB-1 Remote Controller®,
PowerMaster®, Lionel ZW®, ZW®, PowerHouse®, TMCC™, Lionelville™

Содержание WWII Airplane Pylon













Отзывы: