14
LEGACY and Command Control Remote
Operations
Creating a Train with the CAB-1L (blue) remote
Assign the head-end locomotive to the Train:
1. Be sure the VISION Reefer and the locomotive are on the track, powered up
and operational. Their RUN/PROGRAM switches should all be in the RUN
position.
2. Press the TR button and press two digits (from 01-99). This two-digit number
will be the ID of your new train. Be sure to include a leading zero for Train
ID’s 01-09. (Note: TMCC locomotives only support Train ID’s 1-9.)
3. Enter the one or two digit TMCC ID of the head locomotive.
4. Press the F coupler button. This identifies the locomotive as the Front of the
train.
5. Press the SET button, which is located under the plastic cover below your CAB-
1L’s big red throttle knob. Listen for the locomotive to sound its whistle.
Assign the Vision Reefer to the Train:
1. Press the TR button and press two digits (from 01-99). Use the same number
you chose when assigning the head-end locomotive.
2. Enter the one or two digit TMCC ID of the VISION Reefer car.
3. (Optional Step) Press the R coupler button to set as Rear. As Rear, your
reefer’s coupler will be activated via the train address.
4. Press the SET button, which is located under the plastic cover below your CAB-
1L’s big red throttle knob. Listen for the reefer to sound its reply (a metallic
“thunk.”)
