12
12
NOTE:
The antenna connection is already
built into your engine. The antenna in the
upgrade kit is not required.
T
his upgrade is made using kit 6-22960,
which includes a radio circuit and an
antenna. Remove the cab from the chassis as
shown on page 7. First, unplug the 104E unit
circuit board and set it aside. This circuit
board is mounted sideways on the main cir-
cuit board, pull straight back from its mount-
ing pins to remove it. Next plug in the circuit
board (R2LC) into the slot marked
“Radio”.
(same slot as the 104E unit used)
Command Control Upgrade
Command Control
board (R2LC)
Electronic revesing
unit (104E)
Front of FT
Rear of FT
NOTE:
Both rows of pins must be
plugged into the sockets or the
boards will not function.
