13
13
T
his upgrade is made using kit 6-22957
which is for a Lionel F3. The removal
and installation of the coupler is the same,
only the wiring is slightly different. Refer
to the instructions included with the
upgrade kit. With the cab removed, begin
by replacing the old coupler as shown in
the upgrade kit instructions. Route the cou-
pler leads through the frame following the
same path taken by the truck pickup wires.
Once the wires are routed, install the coil
coupler leads into the white 2 pin connec-
tor included with your upgrade kit. See
illustration below for correct installation.
Plug the connector into the main circuit
board at the location shown. Finally, make
sure the wires are clear of the motor and
the truck guides. Neatly bundle them
using twist ties for added protection and
reinstall the cab.
Coil Couplers Upgrade
Front of FT
Front coupler leads
2 pin
connector
Rear of FT