Lionel Freedom, Руководство пользователя

Страница: 5 / 28

SMK
NO SMK
SND
NO SND
RUN
PRGM
T o select a single operational state for
your locomotive (for example, forward
only), you can deactivate the Command
reverse unit’s sequencing function with the
Command reverse unit switch.
Get your locomotive moving in the desired
direction, then slow it down without
stopping. Set the Command reverse unit
switch on the unit to PRGM. Refer to
Figure 1 for the location of the switch. The
locomotive is now “locked” into your chosen
direction.
When you no longer want single-direction
operation, just slide the Command reverse
unit switch back to RUN.
Your locomotive’s reverse unit will
“reset” to forward after any power
interruption lasting five seconds
or longer, regardless of the
original locked-out direction.
Locking your locomotive into a single operational state
Transformer operations
Figure 1. Switch locations
5
Note!
FRONT
Command
reverse unit
switch
Smoke unit
switch
(see page 18
for details)
RailSounds
switch