Lionel Freedom, Руководство пользователя

Страница: 18 / 28

18
Adding smoke fluid to your locomotive’s smoke generator
Y our locomotive is equipped with a
smoke generator that produces safe,
clean, white smoke during operation.
Periodically, you will need to add smoke
fluid to the locomotives. A small tube of
smoke fluid is included with this set.
To add smoke fluid, pierce the end of the
tube with a pin. Before you begin, be sure
that your locomotive is on a level surface
with the smoke generator off. Add four to
eight drops of smoke fluid into the stack as
illustrated in Figure 4. When smoke
production decreases, add four to eight drops
of smoke fluid in the same manner.
Additional smoke fluid (6-62909) is
available from your Lionel dealer.
To turn off the smoke generators, slide
the SMK/NO SMK switch to the NO SMK
position (see Figure 1 on page 4 for the
location of this switch). When the smoke
generator is on, be sure that there is smoke
fluid in the smoke generator to avoid
damage. Smoke production is greater when
the locomotive is pulling a heavy load and
at higher voltages.
Maintaining and servicing your locomotive set
Add smoke here
Front
Rear
Figure 4. Adding smoke fluid
Never operate the smoke unit when dry. This will cause the smoke unit to overheat
and may damage your locomotive.
Caution!