Lionel Christmas Train, Руководство пользователя

Страница: 6 / 16

Controller operations
6
OF
F
FULL
SPEED
R
Attaching the controller wires to the lockon
N ow you’ll need to insert a controller
wire into each of the two spring clips
on the lockon.
It’s easy! Depress the spring clip with your
finger and insert the bare end of the wire
into the exposed opening. Release the
spring clip. Give the wire a little tug to
make sure it’s secure. Repeat these steps
with the other spring clip.
Next, insert the small plug end of the
power pack into the back of your controller,
and plug the other end into a standard
outlet.
Plug this end
into back of
controller.
Stripping the wire
Plug power pack
into standard
wall outlet
Make sure that the
bare end of each wire
is securely attached to
the spring clip.
O nce your track is assembled and
the lockon is
securely attached,
you can connect
the wires from the
controller to the
lockon.
First you‘ll want to
check the ends of the
wires to make sure that the insulation is
stripped back about 1⁄4" to 3⁄8". To
strip the wires, use a pair
of wire strip-
pers or a
sharp knife.
Caution:
Only an adult
should perform
this task! Always use
care when stripping wires.