Lionel Christmas Train, Руководство пользователя

Страница: 13 / 16

Maintaining and servicing your set
13
Linkage
rods
Front truck
screws
Smoke unit
lug wire
Smoke unit
Lamp
Lionel part no.
600-0161-300
Y our 4-4-2 locomotive lights the way
with headlamp illumination. During
the course of normal operation, the lamp
may require replacement.
First remove the two front truck screws
and carefully slide the front truck assembly
off the linkage rods. Lift the smoke unit out
far enough from the cab to allow lamp
extraction. Pull the lamp straight out and
replace it with Lionel part no. 600-0161-
300, available from your nearest Lionel
Authorized Service Center or from Lionel
Service. Be careful not to twist the lamp or it
may break.
Now, reinstall the smoke unit, making
sure that the smoke stack lines up with the
cab top opening. Reassemble the front truck,
making sure that the linkage rods go into
the holes in the front truck. The lug wire
from the smoke unit must be reinserted
through the slot in the front truck assembly
and secured under one of the two front
screws. Tighten the screws firmly but do not
over tighten.
Replacing your 4-4-2 locomotive’s headlamp