Conventional transformer operations
Conventional operations
Y
our train set is capable of operating in the conventional environment with nothing more
than a standard Lionel alternating-current (AC) transformer.
In the conventional environment, your powered locomotive cycles through a repeating
pattern of operations: forward, neutral, reverse, neutral, and so on. To advance to the next
operation, press the
DIRECTION
button on your transformer. Alternately, you could use the
throttle to briefly turn off track power so that the locomotive set advances to the next operation
when power is restored.
Once you cycle the powered locomotive into forward or reverse, you control your
locomotive’s speed by varying track voltage with the transformer’s throttle. To increase the speed
of the locomotive set, you increase track voltage. To decrease the speed, you decrease track
voltage. To stop the locomotive and to change directions (or to enter neutral), track voltage is
turned off or interrupted.
Use the
HORN
and
BELL
buttons on your transformer (or separate buttons if your
transformer is not equipped with these controls) to activate these features in the powered A-unit
locomotive.
To experience all of your locomotive set’s features, we recommend operating in the
TrainMaster Command Control environment. With a simple one-wire connection, you can use
the CAB-1 Remote Controller to access all of the functions of your locomotive set. Refer to
pages 14 to 21 to see how to operate your locomotive set in the TrainMaster Command Control
environment.
5
Содержание 2544W Santa Fe
Страница 1: ...73 1742 250 6 05 Lionel 2544W Santa Fe Super Chief Owner s Manual featuring and ...
Страница 27: ...27 Notes ...