n)
After the module is transported to the installation site, unpack all components carefully.
o)
Do not stand or walk on a module, which may damage the module and cause personal
injury.
p)
Only modules of the same size, specification and model can be connected in series.
q)
In transit, please ensure no transport tool or module is subject to violent vibration, which
may damage the module or cause hidden cracks in the cell sheet in the module.
r)
In transit, never drop a module from a transport tool, roof or hand onto the ground, which
may damage the module or the cell sheet in the module.
s)
Do not wipe a module with any corrosive chemical agent.
t)
Do not disconnect a module when it is loaded.
u)
Do NOT touch the terminal box or the ends of the output cables (connectors) with bare
hands under sunlight, regardless of whether the PV module is connected to or
disconnected from the system.
5 Installation
5.1 Installation safety
a)
Always wear dry insulation protection equipment: insulated tools, head gear, insulated
gloves, safety belt and safety shoes (with rubber soles).
b)
Do NOT install modules under rain, snow or windy conditions.
c)
Do NOT wear metallic jewelry which can cause electric shock during installation.
d)
In case of ground installation, choose an appropriate installation height to avoid long-time
snow cover on the upper half of module in winter in snow weather;
e)
Ensure smooth ventilation at the back of module (the recommended minimal clearance
between the module and the installation surface is 40cm); in case of roof installation, the
roof to be penetrated at the installation and fixing of module shall be properly sealed up to
avoid leakage at the roof;
f)
During module installation, prevent the module from contacting any pointed object, which
may scratch the module; never put any heavy object on the module surface;
g)
Never drill the module or apply any operation that may change the original structure of
module, otherwise the module quality and service life may be negatively affected; the
Warranty does not cover any processed module;
h)
The module shall be installed under an environment of no pressure, no external force and
no deformation;
i)
The frameless module shall be fixed on a durable base (composed of aluminum sections)
with flexible cushion (composed of rubber etc, for which EPDM (Ethylene Propylene
