background image

LINX TECHNOLOGIES, INC.

159 ORT LANE
MERLIN, OR 975

3

2

PHONE: (541) 471-6256
FAX: (541) 471-6251

www.linxtechnologies.com

U.S. CORPORATE HEADQUARTERS

WIRELESS MADE SIMPLE

®

Linx Technologies is continually striving to improve the quality and function of its products.  For this reason,
we reserve the right to make changes to our products without notice. The information contained in this Data
Guide is believed to be accurate as of the time of publication. Specifications are based on representative lot
samples. Values may vary from lot-to-lot and are not guaranteed. "Typical" parameters can and do vary over
lots and application. Linx Technologies makes no guarantee, warranty, or representation regarding the
suitability of any product for use in any specific application. It is the customer's responsibility to verify the
suitability of the part for the intended application. NO LINX PRODUCT IS INTENDED FOR USE IN ANY
APPLICATION WHERE THE SAFETY OF LIFE OR PROPERTY IS AT RISK.

Linx Technologies DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL LINX TECHNOLOGIES BE LIABLE FOR ANY OF
CUSTOMER'S INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY FROM ANY DEFECTIVE
OR NON-CONFORMING PRODUCTS OR FOR ANY OTHER BREACH OF CONTRACT BY LINX
TECHNOLOGIES. The limitations on Linx Technologies' liability are applicable to any and all claims or
theories of recovery asserted by Customer, including, without limitation, breach of contract, breach of
warranty, strict liability, or negligence. Customer assumes all liability (including, without limitation, liability
for injury to person or property, economic loss, or business interruption) for all claims, including claims
from third parties, arising from the use of the Products. The Customer will indemnify, defend, protect, and
hold harmless Linx Technologies and its officers, employees, subsidiaries, affiliates, distributors, and
representatives from and against all claims, damages, actions, suits, proceedings, demands, assessments,
adjustments, costs, and expenses incurred by Linx Technologies as a result of or arising from any Products
sold by Linx Technologies to Customer. Under no conditions will Linx Technologies be responsible for
losses arising from the use or failure of the device in any application, other than the repair, replacement, or
refund limited to the original product purchase price. Devices described in this publication may contain
proprietary, patented, or copyrighted techniques, components, or materials. Under no circumstances shall
any user be conveyed any license or right to the use or ownership of such items.

Disclaimer

© 2010 by Linx Technologies, Inc. The stylized Linx logo,
Linx, “Wireless Made Simple”, CipherLinx, and the stylized
CL logo are the trademarks of Linx Technologies, Inc. 
Printed in U.S.A.

Содержание TRM-315-LT














Отзывы: