LinQTab LQP7, Руководство пользователя

Страница: 6 / 31

6
Battery Charging
Battery Charging Diagram
Please make sure that the battery is fully charged before your first use. To charge the battery,
please connect the matching charger to a power outlet and insert the DC jack end into the
charge interface of LQP7/LQP7H. After a few seconds, the eXiom logo appears on the screen
follow by a picture of a battery being
charged. After a few seconds the screen will
go blank. While the battery is charging, you can view the charging progress by pressing
the power button.
Once the charging is completed, please unplug the charger from LQP7/LQP7H and the power
supply connection.
Power on
Hold down the power button until the eXiom logo appears on the screen.
Wait for a few seconds for the system start up to complete. Unlock the tablet to enter the
home screen.
Hibernate
Once booted up, a short press of the power button will put the LQP7/LQP7H to hibernate state.
During hibernation, LQP7/LQP7H will turn off the screen and enter into the standby condition,
where it will consume very little power. Another short press of power button will bring the
LQP7/LQP7H out of hibernation and you can continue with your operation.