Linn RS232 KNEKT INTERFACE, Руководство пользователя, Страница: 8 / 36

RS232 Knekt Interface
7
AV5103 remote room
The cable from the ROOM port of the Intersekt is connected to the dA port of the cable adapter
(Linn part PCAS187) in the remote room. The adapter routes the audio signals from its MAIN port
to the Balanced Audio input of the Knekt line receiver. The left and right TAPE OUT channels from
the line receiver are routed to one of the Analogue Audio Inputs (AAI) of the AV5103. The bi-
directional control signals from the REM port of the cable adapter are connected to the AV5103 and
the Knekt Line Receiver in a REMOTE IN/OUT loop using two upload converters (Linn part
PCAS180), as shown in the diagram. The REMOTE IN/OUT of a local Linn source should be
connected to the REMOTE OUT/IN of the line receiver, with its audio going to an AAI of the
AV5103. If no local Linn source is used, the REMOTE IN of the line receiver must be looped to its
REMOTE OUT via a single phono lead.
Intersekt Room Interface
Room 3 Room 2 Room 1
PC
Room 8 Room 4 Room 6 Room 5 Room 7 RCU
dA
MAIN
REM
RED WHITE
RCU
LINE
RECEIVER
A1
L TAPE R
WHITE
RED
RJ45
Phono
OUT
IN
AV5103
OUT
IN
L AAI5 R L AAI8 R
Local
OUT
IN
L AUD R