RS232 Knekt Interface
4
OVERVIEW
The RS232 Knekt Interface allows third party devices, such as intelligent touch screen controllers,
to replace the function of the RCU in one or more rooms of an Intersekt based multi-room system.
The block diagram shows a typical system configuration. The Linn equipment situated at the main
system, or in the remote room where the RCU is being replaced, can be controlled and monitored
using a simple text-based (ASCII) command set via the RS232 port on the Intersekt. Operation of
any non-Linn equipment, normally controlled by the RCU, either at the main system or in the
remote room, is the responsibility of the third party controlling device. Other RCU controlled rooms
in the Knekt system are unaffected, and operate both Linn and non-Linn sources in the normal way.
OUT
IN
LINE
RECEIVER
A4 A3 A2 A1
L
R
RCU
OUT
IN
LINE
RECEIVER
A4 A3 A2 A1
L
R
RCU
IR
L
R
NON LINN
SOURCE 1
OUT
IN
L
R
KARIK
CD 1
OUT
IN
L
R
KREMLIN
TUNER 2
OUT
IN
L
R
KREMLIN
TUNER 1
Source 1
L
R
I
O
INTERSEKT
8 rooms
8 sources
Source 6
L
R
I
O
Source 8
L
R
I
O
Source 2
L
R
I
O
Room 3
Room 2
Room 1
PC
OUT
IN
L
R
KARIK
CD 2
MAIN
SYSTEM
REMOTE
ROOM 2
RCU
Touch
Screen I/F
OUT
IN
LINE
RECEIVER
A4 A3 A2 A1
L
R
RCU
OUT
IN
L
R
KREMLIN
TUNER 3
REMOTE
ROOM 8
Room 8
IR
L
R
NON LINN
SOURCE 2
IR
Non Linn Control
Non Linn
Control
Содержание RS232 KNEKT INTERFACE
Страница 1: ...LINN PRODUCT RS232 KNEKT INTERFACE...