manualshive.com logo in svg

Linn RS232 KNEKT INTERFACE, Руководство пользователя, Страница: 16 / 36

Поделиться
Скачать
Linn RS232 KNEKT INTERFACE Скачать руководство пользователя страница 16

RS232 Knekt Interface

15

[rMCTRL=p]

Connects (disconnects) room “r” to (from) the control path of an Intersekt source without affecting
the current audio path, or re-connects the control path to the currently selected Intersekt audio
source, if any.

Command

Response

Description

[rMCTRL=value]

!r<CR>

Connects room to control path of main
system source 1-16

[rMCTRL=D]

!r<CR>

Disconnect room from control path of
all main sources

[rMCTRL=A]

!r<CR>

Connects room to control path of
current main audio source, if any

[rMCTRL=?]

!rMCTRL=value<CR>
!rMCTRL=D<CR>

Returns which main source is currently
being controlled

[rMREC=p]

Sets up a record path for a main system source. The main system source can be recorded on a main
system recording device, or on a recording device local to the room. On expanded Intersekt systems
that have 2 or more room interface cards (PC ports) installed, the “via” tape out connectors are
numbered in sequence from room interface card 1 (i.e. card 1 (pc=1ofmax) contains tape out 1 and
2, card 2 (pc=2ofmax) contains tape out 3 and 4, etc.).

Command

Response

Description

[rMREC=from,to,via,action]

!r<CR>

Main source to main recorder path

[rMREC=from,action]

!r<CR>

Main source to local room
recorder path

[rMREC=to?]

!rMREC=from<CR>
!rMREC=D<CR>

Returns which “from” main
source is connected to the “to”
main recorder, if any

“from”

main source

1 to 16

“via”

tape out

1 to 32

“to”

main recorder

1 to 16

INTERSEKT

“action” = E (enable/start) or D (disable/stop)

Содержание RS232 KNEKT INTERFACE





































Отзывы:

Нет отзывов