Contents
19
When Loading the RCU’s the Linstall tells you to connect the Room Interface 1. If it find
that Room Interface 2 is connected, it asks if you want to re-name this as Room Interface
1.
The Intersekt Room Interface boards can be re-named, as long as the RCU’s serial No’s in
the Linstall are connected to the Room Interface board number. Otherwise everything will
get confused.
Interface position with Tape or VCR sources.
When you install a RECORD device you will be given the option of accessing the
RECORD functions of VCRs and Tapedecks. If you decide NOT to access the RECORD
functions then the record outputs will NOT use up a Room output.
You can allocate a RECORD device to a Room Interface that does NOT exist - eh ? In an
8x8 you have only 1 Room interface card so if you allocate the RECORD device to Room
Interface 2 Room 1 then you will retain access to Room Interface 1 Room 1. (The
maximun Room Interface Number is 15).
