Chapter 3
Advanced Configuration
8
Wireless-N Ethernet Bridge with Dual-Band
condition” before it is closed by the timer. The range is
0
to
100
ms. The default is
3
.
Min. Size of Packet in Aggregation
This option defines
the minimum size (in bytes) of packets to be accumulated
in the aggregate. The range is
0
to
1500
. The default
is
10
.
ADDBA Timeout
This option defines the duration
after which the ADDBA setup is terminated, if there are
no frame exchanges within this duration by the Block
Acknowledgement (ACK) agreement. The range is
0
to
65535
ms. The default is
0
, which disables the timeout.
Aggregation Window Size
This option defines the
maximum number of packets transmitted without getting
ACKs. The range is
0
to
64
. The default is
64
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Video
Use Aggregation
This option defines whether or not the
Media Access Control (MAC) layer will set up an Add Block
Acknowledgement (ADDBA) session. The default is
Yes
.
Select
No
to disable this option.
Accept Aggregation
This option defines whether or not
the MAC layer will accept an ADDBA request. The default
is
Yes
. Select
No
to disable this option.
Max. Number of Packets in Aggregation
This option
defines the maximum number of packets (sub-frames) in
the aggregate. The range is
0
to
7
. The default is
7
.
Max. Aggregation Size
This option defines the maximum
size of the aggregate (in bytes). The range is
0
to
16000
.
The default is
12000
.
Timeout Internal
This option defines the timeout period
in which the aggregate should be closed with a “closing
condition” before it is closed by the timer. The range is
0
to
100
ms. The default is
3
.
Min. Size of Packet in Aggregation
This option defines
the minimum size (in bytes) of packets to be accumulated
in the aggregate. The range is
0
to
1500
. The default
is
10
.
ADDBA Timeout
This option defines the duration
after which the ADDBA setup is terminated, if there are
no frame exchanges within this duration by the Block
Acknowledgement (ACK) agreement. The range is
0
to
65535
ms. The default is
0
, which disables the timeout.
Aggregation Window Size
This option defines the
maximum number of packets transmitted without getting
ACKs. The range is
0
to
64
. The default is
64
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Voice
Use Aggregation
This option defines whether or not the
Media Access Control (MAC) layer will set up an Add Block
Acknowledgement (ADDBA) session. The default is
Yes
.
Select
No
to disable this option.
Accept Aggregation
This option defines whether or not
the MAC layer will accept an ADDBA request. The default
is
Yes
. Select
No
to disable this option.
Max. Number of Packets in Aggregation
This option
defines the maximum number of packets (sub-frames) in
the aggregate. The range is
0
to
2
. The default is
2
.
Max. Aggregation Size
This option defines the maximum
size of the aggregate (in bytes). The range is
0
to
16000
.
The default is
10000
.
Timeout Internal
This option defines the timeout period
in which the aggregate should be closed with a “closing
condition” before it is closed by the timer. The range is
0
to
100
ms. The default is
10
.
Min. Size of Packet in Aggregation
This option defines
the minimum size (in bytes) of packets to be accumulated
in the aggregate. The range is
0
to
1500
. The default
is
10
.
ADDBA Timeout
This option defines the duration
after which the ADDBA setup is terminated, if there are
no frame exchanges within this duration by the Block
Acknowledgement (ACK) agreement. The range is
0
to
65535
ms. The default is
0
, which disables the timeout.
Aggregation Window Size
This option defines the
maximum number of packets transmitted without getting
ACKs. The range is
0
to
64
. The default is
64
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Wireless > Advanced Wireless Settings
Configure the Bridge’s advanced wireless functions.
These settings should only be adjusted by an expert
administrator as incorrect settings can reduce wireless
performance.
Wireless > Advanced Wireless Settings
