Linksys WAP300N, Руководство пользователя

Страница: 31 / 44

After you have selected a network, click Connect . A new screen appears. In the new screen, Network
Name (SSID) and Security Mode of the wireless network you have selected will automatically be
displayed. Depending on the security mode of the network, you will be asked to enter additional
information (see the following table). Once you have entered all the required information, click
Connect to connect to the network.
Security Mode
Additional
Information Required
Description
WPA2 Personal, or
WPA Personal
Passphrase
Enter the passphrase shared by this device and
your wireless router (or access point). It must
have 8-63 characters.
Also support 64 hex.
WEP
Encryption
Select a level of WEP encryption, 40 / 64-bit (10
hex digits) or 104 / 128-bit (26 hex digits) .
Key 1
Enter the WEP key of your network. Key 1 is
the transmit key used by this device.
Authentication
The default is Auto , which allows either Open
system or Shared Key authentication to be
used. Select
Open to use open system
authentication; the sender and recipient do not
use a WEP key for authentication. Select Shared
to use shared key authentication; the sender
and recipient use a WEP key for authentication.
Wireless > QoS
This screen is available only when the device is set to Access Point mode and Wireless Media Connector
mode.