Linksys WAP300N Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 44

Linksys WAP300N Скачать руководство пользователя страница 24

For best performance in a Wireless-N network, select

40MHz only

(only available in 5 GHz radio band) or

Auto

. In Auto mode, this device and other WAP300N

s

connected to this device automatically switch to

the 40 MHz mode if there is no adjacent interference.

Channel

Choose the operating channel for your wireless network. This device will automatically select the
channel with the least amount of interference if you leave the default

Auto

setting. Keeping the default

setting

Auto

is recommended.

IMPORTANT

: When WAP300N is set to Wireless Bridge mode, this device will communicate only with

other WAP300N unit(s) that is/are also in Wireless Bridge mode. In addition, all wireless settings,
including wireless band, channel, channel width, security mode and security passphrase/key, are also
required to be the same on all the networked WAP300N units.

Wireless > Wireless Security

This screen is only available when the device is in Access Point mode and Wireless Bridge mode.
(In Wireless Media Connector mode or Wireless Range Extender mode, wireless security is set up via

Wireless > Basic Wireless Settings

.)

«
...
22
23
24
25
26
...
»

Содержание WAP300N













































Отзывы:

Нет отзывов