Linksys RV042 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 103

Linksys RV042 Скачать руководство пользователя страница 50

41

Chapter 6: Set Up and Configure the Router
VPN Tab - Gateway to Gateway

10/100 4-Port VPN Router

Local Group: It shows the IP address and Subnet of Local Group you set up.

Remote Client: It shows the amount of Remote Client of this GroupVPN.

Remote Clients Status: If you click the

Detail

List button, it shows the details of Group Name, IP address and

Connection Time of this Group VPN.

Tunnel Test: Click the

Connect

button to verify the tunnel status. The test result will be updated in Status. If the

tunnel is connected, a

Disconnect

button will be available so you can disconnect the VPN connection.

Configure: Edit and Delete

Click the

Edit

button to link to the original setup page where you can change the settings. If you click the Edit

button, all of your tunnel settings will be deleted, and this tunnel will be available.

VPN Tab - Gateway to Gateway

Add a new Tunnel

By setting this page, users can add a new tunnel between two VPN devices. See Figure 46.

Tunnel No.: The tunnel number will be generated automatically from 1~30.

Tunnel Name: Enter the Tunnel Name, such as LA Office, Branch Site, Corporate Site, etc. This is to allow you to
identify multiple tunnels and does not have to match the name used at the other end of the tunnel.

Interface: You can select the Interface from the pull-down menu. When dual WAN is enable, there will be two
options. (WAN1/WAN2).

Enable: Check the box to enable VPN.

Local Group Setup

Local Security Gateway Type: There are five types. They are IP Only, IP + Domain Name (FQDN) Authentication, IP
+ E-mail Addr. (USER FQDN) Authentication, Dynamic IP + Domain Name (FQDN) Authentication, Dynamic IP +
E-mail Addr. (USER FQDN) Authentication. The type of Local Security Gateway Type should match the Remote
Security Gateway Type of VPN devices in the other end of tunnel.

IP Only: If you select IP Only, only the specific IP Address will be able to access the tunnel. The WAN IP of the
Router will automatically appear in this field.

Figure 6-44: Gateway to Gateway

«
...
48
49
50
51
52
...
»

Содержание RV042








































































































Отзывы:

Нет отзывов