manualshive.com logo in svg

Linksys RV042, Руководство пользователя, Страница: 39 / 103

Поделиться
Скачать
Linksys RV042 Скачать руководство пользователя страница 39

30

Chapter 6: Set Up and Configure the Router
Setup Tab - Advanced Routing

10/100 4-Port VPN Router

Static Routing

You will need to configure Static Routing if there are multiple routers installed on your network. The static routing 
function determines the path that data follows over your network before and after it passes through the Router. 
You can use static routing to allow different IP domain users to access the Internet through this device. This is an 
advanced feature. Please proceed with caution. 

This Router is also capable of dynamic routing (see the Dynamic Routing tab). In many cases, it is better to use 
dynamic routing because the function will allow the Router to automatically adjust to physical changes in the 
network's layout. In order to use static routing, the Router's DHCP settings must be disabled.

To set up static routing, you should add routing entries in the Router's table that tell the device where to send all 
incoming packets. All of your network routers should direct the default route entry to the Linksys Router.

Enter the following data to create a static route entry:

1. Destination IP: Enter the network address of the remote LAN segment. For a standard Class C IP domain, the 

network address is the first three fields of the Destination LAN IP, while the last field should be zero.

2. Subnet Mask: Enter the Subnet Mask used on the destination LAN IP domain. For Class C IP domains, the 

Subnet Mask is 255.255.255.0.

3. Default Gateway: If this Router is used to connect your network to the Internet, then your gateway IP is the 

Router's IP Address. If you have another router handling your network's Internet connection, enter the IP 
Address of that router instead.

4. Hop Count (max. 15): This value gives the number of nodes that a data packet passes through before reaching 

its destination. A node is any device on the network, such as switches, PCs, etc. 

5. Interface: (LAN, WAN1, WAN2/DMZ) Interface tells you whether your network is on the LAN or the WAN, or the 

Internet. If you’re connecting to a sub-network, select 

LAN

. If you’re connecting to another network through 

the Internet, select 

WAN

. 

Click 

Add to list

 to add a route entry or click 

Delete Selected IP

 to delete the static route entry.

Click the 

Save Settings

 button to save the Routing settings, click the 

Cancel Changes

 button to undo your 

changes or click the 

Show Routing Table

 button to view the current routing table.

Содержание RV042








































































































Отзывы:

Нет отзывов