
34
Chapter 6: Set Up and Configure the Router
System Management Tab - Factory Default
10/100 4-Port VPN Router
pinging the DNS server, or other machine at the ISP’s location. If this test is successful, try pinging devices
outside the ISP. This will show if the problem lies with the ISP’s connection. See Figure 6-26.
Enter the IP address of the device being pinged and click the
Go
button. The test will take a few seconds to
complete. Once completed, a message showing the results will be displayed at the bottom of the Web browser
window. The results include Packets transmitted / received / loss and Round Trip Time (Minimum, Maximum, and
Average).
Note: Ping requires an IP address. The Router’s DNS Name Lookup tool may be used to find the IP address of a
host.
System Management Tab - Factory Default
The “Factory Default” button can be used to clear all of your configuration information and restore the Router to
its factory default settings. Only use this feature if you wish to discard all other configuration preferences.
Click the
Return to Factory Default Setting
button if you want to restore the Router to the factory default
settings. See Figure 6-27. After clicking the button, another screen, as shown in Figure 28 will appear. Click
OK
to
continue. Another screen will appear while the system reboots, as shown in Figure 29.
Figure 6-27: Factory Default
Figure 6-29: System is Rebooting
Figure 6-28: Are You Sure