Linksys RV0041 - 10/100/1000 VPN Router Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 99

background image

46

Chapter 5: Setting Up and Configuring the Router
VPN Tab - Client to Gateway

10/100/1000 4-Port VPN Router

VPN Tab - Client to Gateway

With Tunnel Enabled

This screen allows you to create VPN tunnels from remote PCs (with Linksys VPN Client Software) to VPN routers.
You can reach this page by clicking the Client to Gateway tab or from the Mode Choose screen (figure 5-44).

Tunnel No.

: This shows the number assigned to this tunnel, from 1~5, depending on how many tunnels you have

already set up.

Tunnel Name

: Enter the Tunnel Name, such as LA Office, Branch Site, Corporate Site, etc. This is to allow you to

identify multiple tunnels, and does not have to match the name used at the other end of the tunnel.

Enable

: Checking this box enables the VPN tunnel you’re creating.

Local Group Setup

The Local Group Setup section configures the local settings for the VPN tunnel you are creating. Remember, all
settings for the Local Group must be exactly the same as those for the Remote Group.

Local Security Gateway Type

: There are five types. They are

IP Only

,

IP + Domain Name (FQDN)

Authentication

,

IP + E-mail Addr. (USER FQDN) Authentication

,

Dynamic IP + Domain Name (FQDN)

Authentication

,

Dynamic IP + E-mail Addr. (USER FQDN) Authentication

. The type of Local Security Gateway

Type must match the Remote Security Gateway Type of VPN devices in the other end of tunnel. The first three
options are easier to use because the IP Addresses are static and do not change.

IP Only: If you select IP Only, only the specific IP Address set will be able to access the tunnel. The Router’s
WAN IP address (set above) will automatically appear in this field.

IP + Domain Name (FQDN) Authentication: This selection affords a greater amount of security because each
side of the tunnel must use the same IP Address as well as the same domain name. Only one domain name
can be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote
Group Setup on the other end of the tunnel.

IP + E-mail Addr. (USER FQDN) Authentication: This selection affords a greater amount of security because
each side of the tunnel must use the same IP Address as well as the same email. Only one email address can
be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote
Group Setup on the other end of the tunnel.

Dynamic IP + Domain Name (FQDN) Authentication: This setting uses a dynamic IP address, which is
constantly changing. In addition, the tunnel is confirmed through use of a domain name. Only one domain

Figure 5-44: VPN tab - Client to Gateway

Local Group Setup

Figure 5-43: VPN tab - Client to Gateway

«
...
52
53
54
55
56
...
»

Содержание RV0041 - 10/100/1000 VPN Router




































































































Отзывы:

Нет отзывов

Похожие инструкции для RV0041 - 10/100/1000 VPN Router

Бренд: Aastra Страницы: 2

Бренд: Wattle Страницы: 6

Бренд: Baicells Страницы: 8

Ray 3 Plus Client

Бренд: Sun Microsystems Страницы: 6

Бренд: Planet Страницы: 20

Бренд: XMOS Страницы: 6

Бренд: E-LINX Страницы: 24

Бренд: Z-Wave Страницы: 6

Бренд: Baicells Страницы: 10

Бренд: TP-Link Страницы: 87

EdgeRouter PoE ERPoe-5

Бренд: Ubiquiti Страницы: 13

MMAC-Plus 9G536-04

Бренд: Cabletron Systems Страницы: 42

Бренд: AMX Страницы: 1

Бренд: Maipu Страницы: 26

GS2020E GigaSPIRE BLAST

Бренд: Calix Страницы: 15

Бренд: Wave wifi Страницы: 3

Monochrome Image Acquisition Device NI 1410

Бренд: National Instruments Страницы: 34

IE-SW-VL09T-6TX-3SC

Бренд: Weidmuller Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды