7
Chapter 5: Using the PowerLine Configuration Utility
Overview
PowerLine Ethernet Bridge
Chapter 5: Using the PowerLine Configuration Utility
Overview
After installing the Bridge, you will run the Setup Wizard to install the PowerLine Configuration Utility. Use this
utility to check the PC’s direct connection to the powerline network, search for powerline devices on your
network, and set up security using a network password.
Setup Wizard
1. After the installation of the Bridge is complete, the
Main Menu
screen will appear. Click Setup to run the Setup
Wizard.
You can also click User Guide to view this User Guide, click LINKSYS Web to link to the Linksys website,
www.linksys.com, or Exit to exit this utility.
2. When the
Stop
screen appears, click the
Next
button. You already have connected the Bridge.
Figure 5-1: Main Menu
Note:
If you want the devices on your powerline
network to share high-speed Internet access,
connect the Bridge to a router after you run the
PowerLine Configuration Utility. Refer to “Chapter 5:
Connecting the PowerLine Ethernet Bridge.”
Figure 5-2: Stop
