background image

Wireless Network Access Point

1. At the Windows 2000 desktop, right-click My Network Places. Then,

right-click Local Area Connection.  Choose Properties.

2. If the TCP/IP Protocol is listed for your network adapter, go to step five.

Otherwise, click the Install button.

3. When the Component Type window appears, select Protocol, and click the

Install button.

4. Select Internet Protocol (TCP/IP) from the list, and click the OK button.

5. When the Network window reappears, select TCP/IP, and click the

Properties button.

6. Select Use the following IP Address

7. Enter an IP Address for the computer, along with a Subnet Mask and

Default Gateway. Then, click the OK button. If you do not have these val-
ues, consult your network administrator.

8. When the Network window reappears, click the OK button. Restart your

computer. TCP/IP has now been successfully installed.

37

Instant Wireless

®

Series

The following instructions are provided as examples for reference only. For
complete instructions on installing and troubleshooting TCP/IP, consult your
Windows operating system documentation.

1. Click the Start button, and select Settings. Open the Control Panel. Inside

the Control Panel, double-click the Network icon.

2. If the TCP/IP Protocol is listed for your network adapter, go to step five.

Otherwise, click the Add button.

3. When the Component Type window appears, select Protocol, and click the

Add button.

4. Select  Microsoft in the Manufacturers list and choose TCP/IP in the

Network Protocols list. Then, click the OK button.

5. When the Network window reappears, click TCP/IP, and then click the

Properties button.

6. Select Specify an IP Address

7. Enter an IP Address for the computer, along with a Subnet Mask. Click the

OK button. If you do not have these values, consult your network adminis-
trator.

8. When the Network window reappears, click the OK button. Restart your

machine. TCP/IP has now been successfully installed.

36

TCP/IP Setup for Windows 2000

TCP/IP Setup for Windows 98 and Millennium

Содержание Instant Broadband Series































Отзывы: