![Linksys HU200 Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/linksys/hu200/hu200_user-manual_1923804020.webp)
14
Chapter 5: Connecting the Home Wireless-G USB Adaptor
Connecting the Adaptor
Home Wireless-G USB Adaptor
Chapter 5: Connecting the Home Wireless-G USB Adaptor
Connecting the Adaptor
1. Connect one end of the included USB cable to the Adaptor’s USB port.
2. Connect the other end of the cable to one of the USB ports on your computer.
3. The Power LED should light up when the Adaptor is plugged in.
4. Raise the antenna. Make sure the antenna points straight up into the air, at a 90º angle from the Adaptor. This
will ensure optimum wireless operating range and performance.
Congratulations! The installation of the Home Wireless-G Adaptor is complete.
If you want to check the link information, search for available wireless networks, or make additional
configuration changes, go to “Chapter 6: Using the Wireless Network Monitor.”
Figure 5-1: How the Adaptor Connects to Your PC
NOTE:
You must run the Setup Wizard before connecting the Adaptor.
Figure 5-2: Adaptor’s USB Port
Figure 5-3: PC’s USB Ports
NOTE:
If you want to attach the Adaptor to your wall, go to the next section,
“Using the Adaptor’s Wall Mount,” before proceeding to “Chapter 6: Using the
Wireless Network Monitor.”