10
In the left column of the Utility screen, highlight the Instant
GigaDrive you are confi guring and click the Quick Setup
button (shown) on the far left of the tool bar. The Setup
screen will be displayed, as seen below.
The Instant GigaDrive Utility’s Quick Setup displays the settings you need
to get your GigaDrive on the network and running smoothly. You can come
back and change this information at any time, but right now you need to check
each category to confi rm that your current GigaDrive
settings are properly confi gured for your system.
Server Name
The Server Name is the name by
which the Instant GigaDrive will be identifi ed in
your network environment. The current name, which
is likely a series of letters and numbers, is your
GigaDrive’s default name. You can change the name
from anything to GigaDrive, to Disk Server, to Bob.
Changing the name will not in any way effect the
internal function of the GigaDrive.
Co
mme
nt
Reserved solely for notes (i.e., location, user groups, contents,
etc.).
Quick Setup
Button
Quick Setup
Note
: If you plan to
install two or more
Instant GigaDrives on
the same network, you
must connect and set
them up one at a time.
Setting them up con-
currently will cause
network problems.
Instant GigaDrive User Guide.indd
10/6/99, 8:47 AM
10
All manuals and user guides at all-guides.com
