Avoid sound reflections in front of the speaker by aligning the front edge of the speaker with the edge of the surface it has been placed on. The
back of the speakers have a vented port opening. Do not block the vented port opening, as it will reduce the bass and/or create a rattling sound.
An equal distance to the corners and side walls for both speakers will give the most natural and precise reproduction. Optimize the listening
distance to the speakers depending on the room acoustics and reflecting walls.
Optimizing High Frequencies
Adjust the angle of the speakers towards the center listening position for preferred high frequency level and soundstage depth.
Optimizing Bass Level
To increase your bass response, place your speakers closer to the walls and corners.
Notes on Speaker Terminals and Cabling
The input terminals on the speakers accept high performance cables with a thickness of up to 4 mm²/10AWG. Your speakers come with a pair of
1.5 mm2/16AWG speaker cables matching the speaker terminals and most amplifiers. If you need longer cables, consult your salesperson or retail
store for advice on which cables best match your listening environment.
NOTE:
The Director accepts a maximum 1.5 mm²/16AWG cable.
The exposed wires at each end should be 1/3" (8 mm), and the strands may not be split up. The strands should all be inserted into the terminal.
Congratulations! Installation is complete.
2 Enhancing Your Sound
