This Quick Installation Guide will guide you through connecting each
two-wire cable to a speaker at one end, and your audio amplifier at
the other end. For each channel (Left and Right), you will connect the
red
coded input terminal on the speaker to the
red
coded output
terminal of the audio amplifier, and equivalently the
black
to the
black
.
Connecting the Speakers to the Director
To ensure proper operation and sound quality, the cables must be
connected to the speakers correctly. Do not allow any cable strands
to touch the other polarity or the rear panel of the amplifier. Make
sure that the speakers are connected to the correct Left and Right
outputs.
NOTE:
If the colors are not matching at both ends, the
speakers will play out-of-phase, resulting in the reduction
of dynamics and bass and the elimination of the position
of the music or vocals in between the two speakers.
NOTE:
The speakers are interchangeable and can be used
as either the left or right speaker. The terminals and the
cables are color coded for correct polarity.
Installation Overview
