Linksys BEFCMUH4 Скачать руководство пользователя страница 48

Страница: 48 / 49

Linksys BEFCMUH4 Cable Ga 802.11b Wireless-Ready

Appendix F : Warning Statement

15.21

CAUTION: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Prohibition of co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other

antenna or transmitter.

15.105 Federal Communications Commission (FCC) Requirements, Part 15

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

---Consult the dealer or an experienced radio/TV technician for help.

Содержание BEFCMUH4


















































Результаты поиска

Содержание BEFCMUH4

Отзывы:

Похожие инструкции для BEFCMUH4

Бренды по названию

Популярные бренды

Linksys BEFCMUH4, Быстрое руководство

Результаты поиска

Содержание BEFCMUH4

Отзывы:

Похожие инструкции для BEFCMUH4

Бренды по названию

Популярные бренды