Linksys BEFCMUH4 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 49

Linksys BEFCMUH4 Скачать руководство пользователя страница 18

Linksys BEFCMUH4 Cable Ga 802.11b Wireless-Ready

can change the access priviledge and restore factory default of the
Gateway. Also, you can enable/disable the DHCP Server function.

IMPORTANT:

If you have previously enabled any

Internet-Sharing Proxy

server software

on any of your PCs, you must disable it now.

Some examples of Internet-sharing software are Internet LanBridge,
Wingate, ICS, and Sygate. To disable your Internet-sharing software:

•

If you are running Netscape Navigator: Click

Edit

>>

Preference

>>

Advanced

>>

Proxies

> and click

Direct Connection to the Internet

.

•

If you are running Internet Explorer v5 or better, click

Start

>>

Settings

>>

Control Panel

>>

Internet Options

>>

Connections

>>

LAN

Settings

. Remove the checks from all three boxes. Click

OK

to

continue.

Also, you must disable any Internet log-on software (such as Ivasion
Winpoet or Enternet 300) and any firewall software (such as ZoneAlarm
and Watchdog) on all of your PCs.

5. If you have already done so, click the

Apply

button to save your settings.

Close the web browser.

6. Restart your computers so that they can obtain the Gateway’s new

settings.

17

«
...
16
17
18
19
20
...
»

Содержание BEFCMUH4


















































Отзывы:

Нет отзывов