Linksys BEFCMUH4 Cable Ga 802.11b Wireless-Ready
Appendix A: Troubleshooting
Common Problems and Solutions
This section provides possible solutions to problems regarding the installation
and operation of the Linksys BEFCMUH4. If your situation is described here,
the problem should be solved by applying the corresponding solution. If you
can’t find an answer here, please contact with your local dealer.
1. I need to set a static IP address on a PC.
The Gateway, by default, assigns an IP address range of 192.168.100.10 to
192.168.100.41 using the DHCP server on the Gateway. To set a static IP
address, you can only use the ranges 192.168.100.2 to 192.168.100.9 and
192.168.100.42 to 192.168.100.254. Each PC or network device that uses
TCP/IP must have a unique address to identify itself in a network. If the IP
address is not unique to a network, Windows will generate IP conflict error
message. You can assign a static IP address to a PC by performing the
following steps:
For Windows 95, 98, and Me:
A. Click
Start
,
Settings
, and
Control Panel
. Double-click
Network
.
B. In
The following network components are installed
box, select the
TCP/IP->
associated with your Ethernet adapter. If you only have one
Ethernet adapter installed, you will only see one TCP/IP line with no
association to an Ethernet adapter. Highlight it and click the
Properties
button.
C. In the
TCP/IP properties
window, select the
IP address
tab, and select
S
pecify an IP address
. Enter a unique
IP address
that is not used by any
other computer on the network connected to the Gateway. You can only
use an IP address in the ranges 192.168.100.2 to 192.168.100.9 and
192.168.100.42 to 192.168.100.254. Make sure that each IP address is
unique for each PC or network device.
D. Click the
Gateway
tab, and in the
New Gateway
prompt, enter
192.168.100.1, which is the default IP address of the Gateway. Click the
Add
button to accept the entry.
E. Click the
DNS
tab, and make sure the
DNS Enabled
option is selected.
18
Содержание BEFCMUH4
Страница 7: ......
