Linksys AG041 Скачать руководство пользователя | Manualshive

Страница: 25 / 80

background image

18

Chapter 5: Configuring the ADSL Gateway
The Setup Tab

ADSL Gateway with 4-Port Switch

Optional Settings (Required by some ISPs)

•

Host Name and Domain Name. These fields allow you to supply a host and domain name for the Gateway.
Some ISPs require these names as identification. You may have to check with your ISP to see if your
broadband Internet service has been configured with a host and domain name. In most cases, leaving these
fields blank will work.

•

MTU. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network
transmission. Select

Manual

and enter the value desired. You should leave this value in the 1200 to 1500

range. By default, MTU is configured automatically.

Network Setup

•

Router IP. The values for the Gateway’s Local IP Address and Subnet Mask are shown here. In most cases,
keeping the default values will work.

•

Local IP Address. The default value is 192.168.1.1.

•

Subnet Mask. The default value is 255.255.255.0.

•

Network Address Server Settings (DHCP). A Dynamic Host Configuration Protocol (DHCP) server automatically
assigns an IP address to each computer on your network for you. Unless you already have one, it is highly
recommended that you leave the Gateway enabled as a DHCP server.

•

Local DHCP Server. DHCP is already enabled by factory default. If you already have a DHCP server on your
network, set the Gateway’s DHCP option to

Disable

. Only use

DHCP Relay

if requested by your ISP; your

ISP will supply you with the IP Address

•

DHCP Server. If you enable the DHCP Server or DHCP Relay for the Local DHCP server, enter the IP address
for the DHCP server in the fields.

•

Starting IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. This value
must be 192.168.1. 2 or greater, because the default IP address for the Gateway is 192.168.1.1.

•

Number of Address. Enter the maximum number of computers that you want the DHCP server to assign IP
addresses to. This number cannot be greater than 253. By defaul, the range is 192.168.1.100 to
192.168.1.149.

•

DHCP Address Range. The range of DHCP addresses is displayed here.

•

Client Lease Time. Enter the minutes in the field.

Figure 5-9: Setup Tab - Optional Settings

domain

: a specific name for a network of computers

packet

: a unit of data sent over a network

subnet mask

: an address code that

determines the size of the network

«
...
23
24
25
26
27
...
»

Содержание AG041

















































































Отзывы:

Нет отзывов

Похожие инструкции для AG041

NETWORK INTERFACE CARDS

Бренд: Secure Computing Страницы: 17

Бренд: System Sensor Страницы: 10

Бренд: Planet Страницы: 12

Бренд: HW Group Страницы: 19

Бренд: TANDBERG Страницы: 63

6201-WA-DFNT to DFNT

Бренд: ProLinx Страницы: 45

Бренд: SIEB & MEYER Страницы: 40

VoiceFinder AP200

Бренд: AddPac Страницы: 46

Dynalite DTK622-USB

Бренд: Philips Страницы: 2

Dynalite DMNG232

Бренд: Philips Страницы: 2

Dynalite DDNI-LON

Бренд: Philips Страницы: 2

Dynalite DDNG485

Бренд: Philips Страницы: 2

Dynalite DDNG232

Бренд: Philips Страницы: 2

Dynalite DDNG100BT

Бренд: Philips Страницы: 2

Dynalite DDNG-KNX

Бренд: Philips Страницы: 2

Dynalite DDMIDC8

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 80

Бренд: NETGEAR Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды