LinkSprite LS-Y201-Infrared, Инструкция по эксплуатации

Страница: 6 / 9

www.linksprite.com
6
/
9
Notes:
1. The starting read address must be integer times of 8.
2. When multiple cameras are used, XX of 56 XX 36 01 00 is the device
ID.
3. If the UART is RS232 level. If want to connected to MCU, please add a
level shifter or remove MAX232IC. RS232 level is used in the module
as the communication distance of raw UART cannot be longer than 1
meter.
4. When powered on, serial port will output the following message
actively:
Ctrl infr exist
User-defined sensor
625
Init end
The host only needs to determine when “Init end”
（
36 32 35 0D 0A
49 6E 69 74 20 65 6E 64 0D 0A
）
is received. After “Init end” is
received, the host can send the take picture command after waiting
for another 2-3 seconds.
5. Program flow chart
Initialization: