5
Safety Precautions
1.
Read this guide before using the equipment. Save these instructions for later use.
2.
Follow all warnings and instructions which may be placed on the stage.
3.
Never use the equipment if any cables have been damaged. Do not allow any heavy objects to rest on
the cables. Never lay the cables on the floor.
4.
Do not obstruct any ventilation holes. Do not attempt to insert anything into these openings. Provide
adequate ventilation of at least 75mm all around the equipment.
5.
Do not expose the equipment to water. If for any reason it gets wet, unplug it from the mains and
contact Linkam Scientific Technical Support.
6.
The equipment is not intended to be used outdoors
.
7.
If any problems occur, turn all Linkam equipment off and contact Linkam Scientific Technical
Support.
8.
Do not remove any covers from the equipment, any
servicing should be carried out by qualified
service personnel.
Symbol References
Caution:
This safety symbol is on the back panel of the equipment and warns:
-
The user must not make or remove any connections while the unit is powered on.
To avoid electric shock do not remove the cover. Refer servicing to qualified service personnel.
Caution:
This warning symbol indicates that the surface labelled with this symbol may be hot.
