4
Important Notice
Please check that your Linkam equipment has not been damaged during transit. If there is any evidence of
external damage DO NOT SWITCH ON ANY ELECTRICAL ITEMS.
Contact LINKAM SCIENTIFIC or an appointed distributor immediately. Your warranty may be
impaired if Linkam is not informed of any transport damage within 7 working days of delivery.
NO attempt should be made to repair or modify the equipment in any way, as there are
no user
replaceable parts
.
No attempt should be made to open the case except by qualified personnel as hazardous voltages are
present.
In order to use this equipment successfully, please take time to read this user guide fully before using it.
Warranty
This equipment has a warranty against defects in material and workmanship for a period of 12 months.
Linkam will either repair or replace products that prove to be defective. For warranty service or repair, this
product must be returned to Linkam or a designated service facility.
The warranty shall not apply to defects resulting from interfacing, unauthorized modification or misuse,
operation outside of the environmental specifications for the product, or improper site preparation or
maintenance.
Technical Support
Any technical questions or queries should be addressed to the Technical Support Department at
suppor[email protected]
Equipment Maintenance
Use a small quantity of isopropyl alcohol (IPA) with a soft cloth and gently wipe the surface. To clean the
hotstage, use IPA and cotton swabs. Take great care not to touch the platinum
temperature sensor protruding from the side of the heating element. The sensor is very fragile.
Handling Liquid Nitrogen
To cool samples below room temperature a LNP96 liquid nitrogen pump is required. Please refer to your
health and safety manual for instructions on how to handle liquid nitrogen safely. Always use in a well
ventilated room.
