background image

 

iGrowSeries 100 Installation Manual 

 960-0001-20 

Terms and Conditions 

 

Warranty 

Link4 warrants that the iPonic 600 Controller with the exception of the sensor module sold under this contract 

will be free from defects in material and workmanship for a period of 36 months after the date of purchase.  The 

sensor module is warranted for 12 months from the date of purchase. This warranty will be limited to the repair 

and replacement of parts and the necessary labor and services required to repair the goods.  IT IS 

EXPRESSLY AGREED THAT THIS WARRANTY WILL BE IN LIEU OF ALL WARRANTIES OF FITNESS 

AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY 
Moreover, any description of the goods contained in this contract is for the sole purpose of identifying them, is 

not part of the basis of the bargain, and does not constitute a 

warranty

 that the goods will conform to that 

description.  The use of any sample or model in connection with this contract is for illustrative purposes only, is 

not part of the basis of the bargain, and is not to be construed as a 

warranty

 that the goods will conform to the 

sample or model.  No affirmation of fact or promise made by Link4, whether or not in this contract, will constitute 

warranty

 that the goods will conform to the affirmation or promise. 

Link4 shall not be responsible for replacement(s) or repair(s) which become defective from user negligence, 

modification, abuse and/or any types of improper usage.  Nonconformance to any of the specifications in the 

product manual will void the warranty.  Furthermore, our liability to the goods sold, whether on warranty, 

contract, or negligence, will be released upon the expiration of the warranty period when all such liability shall 

terminate. 
Link4 shall not be responsible for any loss or claims due to consequential damages afford by the Buyer.  Link4 

also reserves the right to make any necessary changes to features and specifications to condition or warranty. 

Returns 

Merchandise cannot be returned without a Return Merchandise Authorization (RMA) number from 

Link4.  Requests for permission to return defective items must be made within (14) fourteen days after receipt of 

shipment.  A Link4 RMA # for approved returns must appear on both the customer's shipping carton and the 

related receipt memo.   Parts under warranty will be repaired at no charge.   Other returned items will be 

subjected to the following restocking charges:  20% for no value added items, 40% for value added items, and 

75% for custom designed or built to specification items.   

Repair 

A repair order must also have a Link4 Return Merchandise Authorization (RMA) number.  Repairs that are not 

covered by the warranty will be billed on a material and labor basis.  Items returned for repair must be sent to 

Link4 with prepaid return transportation Link4 will not be responsible for damage(s) due to improper packaging 

or shipping and delivery of items returned for repair.  

Additional Costs 

It is expressly agreed that Buyer will reimburse Link4 for any additional costs attributable to changes in the 

specifications, dire

ctions, or design of the items furnished which are requested or approved by Buyer at Link4‟s 

listed retail prices in effect at the time such changes are ordered.  

Governing Law  

The validity of this contract and of any of its terms or provisions, as well as the rights and duties of the parties 

under this contract, shall be construed pursuant to and in accordance with the law of California.  The parties 

specifically agree to submit to the jurisdiction of the courts of California. 
 

 

Содержание iPonic 600









































































Отзывы: