background image

Installation Guide

4 18-HD95D1-1C-EN

 4.  Trane

®

 & American Standard

®

 Link Systems

 Installation.

 Trane and American Standard 

Link systems are built to be “plug and play”. 
Once you’ve connected the outdoor unit, 
indoor unit, SC360, and UX360, turn on the 
system. The equipment will communicate 
and configure the system automatically to 
default settings. 

  Verification.

 You can easily verify all modes 

of operation. Link can run and verify each 
mode of operation as well as verify the 
system is functioning properly. For example, 
instruct the system to deliver 1200 CFM of 
airflow, and the system will verify correct 
operation. Once testing has been completed, 
you can get a commissioning report that 
documents the results. 

 Monitoring.

 With a homeowner’s 

permission, you can monitor data from the 
system remotely. This includes creating a 
birth certificate that captures how the system 
was operating on day one, and tracking 
performance over time. 

 Upgrades.

 Connected systems can have 

their software remotely upgraded through 
the SC360, including pushing additional 
features out to the installed communicating 
equipment. No dealer visit or SD cards are 
required.

Technical Advantages

•  Self-configuring system on startup
•  Automated verification simplifies charging 

and airflow procedures, and automatically 
goes through all modes of operation to verify 
the system is operating properly and within 
specifications

•  New sensors to easily monitor data, with 

information shared wirelessly, either onsite 
or in the cloud

•  Standardized and consistent wiring: four-wire 

connection for all communicating equipment 
simplifies installation

•  Faster, more robust communication protocol
•  SC360 controls all system decisions, and 

has Temperature and Humidity sensing 
capabilities as well as Wi-Fi and BLE 
communications on-board.

•  Remotely control connected systems from 

the Home mobile app.

•  The system supports up to four indoor 

temperature and humidity sensors in a 
non-zoned system for averaging, including 
ZSENS930AW00MA sensors.

Download the Trane Diagnostics or American Standard Diagnostics mobile app from the 

Google Play

 Store or App Store

®

.

All trademarks referenced are the trademarks of their respective owners. Google is a trademark of Google LLC.

Содержание SC360

















Отзывы: