for exteNded ChANNels:
• Select another spare CAN channel.
• Set Mode to “Transmit User Stream X” (Where X is the next unused
transmit or receive user stream number).
• Set CAN ID to 50.
• Set Transmit Rate to 20Hz.
• Set Format to Normal.
• Change to the Streams tab of the CAN Setup window.
• Select Stream X and then click Load Stream.
• Select ‘GaugeART_CAN_Gauge_Extra_ID50.lcs’ and click the Open
button (find this in the CAN folder of your PCLink install).
• Change back to the Mode tab, select the next spare CAN channel.
• Repeat steps1-7 for the ‘GaugeART_CAN_Gauge_Extra_ID51.lcs’ file,
this time using the CAN ID 51.
• Click Apply and then OK.
• Make sure a Store (F4) is performed.
PCLink Extended CAN Channels 1
PCLink Extended CAN Channels 2
trouBleshootING:
• App says gauge is not connected:
connect gauge in Wi-Fi settings
before opening app. Make sure Wi-Fi is connected (a checkmark
appears when connected). Make sure to give app permission to use
Wi-Fi if prompted.
• Gauge stays in Programming Mode:
the gauge will stay in
programming mode until a configuration is sent.
CoNtACt us:
9
10
Содержание CAN Gauge
Страница 1: ...CAN Gauge USER MANUAL Part No 101 0226...