sAve & seNd CoNfIGurAtIoN:
• Tap the icon in the top right and tap Save.
• Enter a name under “Enter Save File Name” and tap Save.
• To program, tap Send Configuration. The gauge will be programmed
and will show your configuration. Programming takes anywhere from
10-60 seconds and will update the gauge’s firmware automatically if
an update is available.
loAd CoNfIGurAtIoN:
• Select the ECU you are working with.
• Previously saved files will be shown in the second drop down. Click
load to open the file.
• To Edit your saved configuration, tap edit once loaded.
• To program, tap Send Configuration.
pClINk CAN streAm
CoNfIGurAtIoN:
• Open PCLink
• Open the CAN Setup window > ECU Controls > CAN Setup).
• Select the CAN module to be used.
• Set the Mode to ‘User Defined’.
• Configure the Bit Rate to 1 Mbit/s
• Select a spare CAN channel.
• Select ‘Transmit Generic Dash’ from the Mode drop-down menu.
• Set the CAN ID to 56.
• Set the Transmit Rate to 20Hz.
• Set the Format to Normal.
• Click Apply and then OK.
• Make sure a Store (F4) is performed.
7
8
Содержание CAN Gauge
Страница 1: ...CAN Gauge USER MANUAL Part No 101 0226...